Showing posts with label material. Show all posts
Showing posts with label material. Show all posts

Wednesday, 17 June 2015

A History on TPO: The Commercial Roofing Go-To


TPO is at times considered the new roofing system on the block, even though the material has been around for decades and has proven its worth in the industry. Here is a little background on how TPO came about, the history of its testing and development, and where it stands today:

Back in the 1970s, flexible sheet, for a variety of uses, was either EPDM or flexible PVC. EPDM was not weldable and flexible PVC contained liquid plasticizers. Those plasticizers led to hazing of automotive windshields and embrittlement of the PVC as they evaporated. Thermoplastic polyolefins (TPO) were developed to be inherently flexible, plasticizer and halogen free, and to heat-weld. TPO membranes were first used for geomembrane applications such as pond liners. They also began to appear in the automobile industry to protect exterior surfaces and to be used as wire covers.

The first known TPO roofing membrane was installed in 1986 in Michigan. The TPO was produced by Montell specifically for the roofing market. Montell merged with two other companies in 2000 to become Basell. That company merged in 2007 with Lyondell to become Lyondell-Basell, which still supplies the majority of TPO to the roofing industry. In the late 1980s, Versico, a division of Goodyear Tire and Rubber, started to promote VersiWeld®, a reinforced TPO roofing membrane. They were followed by JPS Elastomerics in the early 1990s which launched Hi Tuff EP. JPS eventually became Stevens Roofing Systems. In the early 1990s, concerns began to surface about the use of halogenated fire retardants in TPO and their effect on UV resistance. This caused manufacturers to alter their formulations, using magnesium hydroxide as the fire retardant. This remains the case today. In the mid-1990s, Carlisle Syntec Systems acquired Versico and began marketing a TPO roofing membrane named SureWeld.

Beginning in the late 1990s, TPO began to gain significant market share. The specification covers physical properties, dimensions, and durability properties. The latter includes ozone resistance, heat aging, and weather resistance. Oven aging was tested at 240°F and went for 28 days. The ultraviolet light resistance is tested using a xenon arc apparatus and the exposure was doubled in 2006 to 10,080 kJ/m2. In 2011, the ASTM standard was revised again to address the heat aging protocol. This was raised to 240°F exposure for 224 days or 32 weeks, from 28 days.

From 1998 to now, TPO membrane sales have grown annually at a double-digit rate, far outpacing any other single-ply, mod bit, BUR, or metal product and its popularity as a commercial roofing material has spread worldwide.

Tuesday, 14 April 2015

A Lesson on Vinyl Siding

                                     

The Benefits of Vinyl Siding
There are few subjects in the whole realm of residential and commercial construction products that draw battle lines as sharply as vinyl siding. Proponents harp on the fact that it never needs painting, while its detractors insist that houses should never be covered with anything but real wood. 

As a building material, vinyl siding is relatively new — it was introduced in the late 1950s as a substitute for aluminum siding. However, its reputation was tarnished in the early days when it cracked, faded, buckled, and sagged due to lack of industry knowledge on how to perfect the product. Thankfully, ongoing changes in the product's chemistry and installation techniques have improved its performance and furthered its acceptance by builders and homeowners.

Today, a mid-grade vinyl costs about $1.60 per square foot to install, not including the necessary trim pieces; while the installed price of mid-grade cedar clapboard, exclusive of trim and paint, is about 2.5 times higher. For many people, price isn't the issue at all; the real seduction of plastic siding is reduced maintenance.

All Plastic Siding is Not the Same
New, so-called virgin vinyl siding has a greater complement of the key additives that impart flexibility and resistance to UV degradation. Some manufacturers will boast their product as 100 percent virgin, but most siding is made with a core of remelted vinyl top-coated with virgin material. Rap on a vinyl-sided wall with your knuckles, and it will flex and sound hollow. That's because, in most cases, only a relatively small area of a vinyl panel is actually resting against the sheathing. 

A thin panel, or one without support, is more likely to sag over time. However, the thicker sidings tend to be stiffer, and therefore more resistant to sagging, but stiffness depends on other characteristics as well. Panels with a folded-over, doubled nailing hem and a relatively deep profile tend to be stiffer than others, as do those with narrow “clapboards”: The more bends the better. Although claims are made that thicker siding is also more impact resistant than thin siding, test results suggest that it has more to do with its chemical makeup, which, unfortunately, is not available to consumers who want to compare products. Thinner, less-stiff sidings can also be sucked off a house when high winds blow. Reading the manufacturer's warranty should give you a good indication of the product's ability to handle heavy weather.

While wood siding is fastened tightly to the house, vinyl siding literally hangs from nails driven through horizontal slots at the top of a panel's nailing hem. The reason for the loose nailing has to do with the vinyl's need to expand or contract as the temperature changes.
One characteristic that distinguishes vinyl from other siding is its overlaps. While lengths of wood siding meet in an unobtrusive butt, vinyl panels must be overlapped by about 1 inch wherever they meet, resulting in telltale vertical lines. The thicker the vinyl, the more obvious the overlap. Compounding the problem, most vinyl siding panels are molded to represent double or even triple widths of clapboards. This slashes installation time dramatically, but it also makes panel overlaps even more visible. A good installer will orient overlaps away from dominant views, for example, by running the siding from a back corner to a front corner. On the front of the house, panels should be installed so seams are least visible to someone approaching the front door.

Every quality vinyl siding job starts with the contractor. Don't hesitate to ask potential installers for their certifications — most of the large manufacturers certify installers in proper installation techniques — and for the names of satisfied customers.

Not Entirely Maintenance Free

To keep vinyl siding looking its best, it should be washed periodically to remove the mold, mildew, dirt, and chalky oxidation that collects on the surface. Avoid using high-pressure equipment such as powerwashers to clean your siding as it can compromise the integrity of the product. Thankfully, repairing a damaged panel is simple. With a zip tool and a flick of the wrist, you can simply unhook it from the ones above and below, then pull out the nails. A new panel can then be snapped in place, nailed, and rehooked. The biggest problem is matching the replacement to the surrounding pieces, which will undoubtedly have faded.

All vinyl siding will fade somewhat. After 10 to 15 years, the change can be significant. When that happens, or if you simply want to change its color, vinyl can be painted, as self-defeating as it may seem. Wash the siding first, and use latex paint, which will flex with the vinyl's movement. But don't count on changing a pale-yellow house to hunter green; dark colors absorb more heat than lighter ones and can cause panels to expand too much and buckle.

Going with Vinyl

Much of what appeals to us about older historic houses, apart from their architectural style, is the graceful moldings, well-proportioned trim, subtle shadow lines, even the slight irregularities in the spacing of the siding — testaments to the skills of this country's housewrights. But in countless slipshod re-siding jobs, where vinyl is slapped up over the existing shingles or clapboards, these details have been obliterated, making the facades of handsome gingerbread houses as plain as sheet cakes.

For those contemplating having a house re-sided, find a contractor who specializes in old-house work not just in vinyl siding, pending that all the architectural details remain in place. A proper paint job may make more sense, if that's the case. Sometimes, re-siding jobs are sold as a way to “tighten up” the house and reduce energy bills. The installers simply nail up a layer of foil-faced foam before the vinyl goes up. The final word: If you have any doubts about its effects, don't put vinyl siding on your old house. 

Monday, 16 March 2015

Asphalt Roofing Systems: Freedom of Selection or Overkill?

There are many different options from a variety of manufacturers when deciding which asphaltic roofing material to use for a building. But is having so many choices necessary, and could it cause more harm than good?



Asphaltic roofing has been around for more than 150 years and has many advantages in the commercial market, including long life, multi-ply redundancy, and outstanding puncture resistance. However, the market share has decreased as a result of competition from less expensive single-ply membranes, and now the sheer quantity of offerings—which are estimated between 800-1,000 asphalt roof systems per manufacturer—doesn’t make sense in this smaller market. In contrast, TPO, which is larger than the asphaltic business, has about 75 percent fewer systems.

We understand the competitive pressure out in the marketplace and it’s nice to give customers a choice, but there are risks involved. It could cause confusion as professionals scramble to understand so many roofing systems, complicate the sales process, and drive up the cost for distributors, manufacturers, and, ultimately, customers.

Instead of focusing on how many different ways we can arrive at the same result, we should focus on what is the most cost-effective way (from an installed cost standpoint) to arrive at the desired result. For example, if a customer is looking for a 20-year hot mopped system over insulation, there are approximately 20 different combinations (i.e., systems) possible, but only one is the most cost effective: the one that requires the least steps and less labor. When we approach solutions this way, we find there are products that are not needed and certainly many systems that are not delivering value to customers.

The benefit of changing to a more manageable set of roofing choices is that it will result in less confusion with easier-to-understand procedures, saved time and labor, and simplified training. As a specifier, consultant, or contractor, you’ll know that you’re choosing a system that is reliable and meets your customer’s needs. As a manufacturer or distributor, it means less SKUs to manage, which saves costs associated with codes approvals, manufacturing, and storage. And ultimately for customers it means a more streamlined decision process and cost-effective solution. For all parties involved, it is a win-win situation.

Trudel is taking the lead in focusing on simplifying the sale and creating value for our customers. If more manufacturers follow suit, it can eventually improve competitiveness and cost in the asphaltic industry.